How to Install a Liner For Your Above Ground Pool

After the framework has been installed for yourthat the liner won't slip. Place water in the pool
above ground pool, you have to also install a linerand loose the coping. You should do this with so
for it. The liner is used to keep the water in themuch coping at a time while the water pulls at the
pool and it also protects the framework of it.liner.
There are two ways to have an above groundThe sections of the coping should be reset around
pool liner installed: either hire a professional installerthe circular portion of the pool. Allow the water to
or do it yourself. More people seem to opt forrise up to 6 inches. Make sure that the seams are
the latter, not only to save on installation costs,evenly lined and the coping is secured at the top
but also to get a feel of how to do the installation.rail. Let the water run until it gets midway to the
Depending on how your pool was built, you willskimmer. As the water flows in the pool, make
either install an over lap liner or a beaded liner.sure to smooth out additional wrinkles as a result.
This article will discuss both ways to do it.Installing A Beaded Liner
Installing An Over Lap LinerLay the liner on a flat area by the pool. If there
Lay the liner on a flat area near the pool. If thereare any large wrinkles, use your hands to smooth
are large wrinkles, use your hands to smooththem out. The liner should be put inside of the
them out. The top coping rail that is around thepool. Take the edge that is beaded and connect it
pool should be taken off. You will have to set theinto the liner retainer. You can find the liner
liner to be placed inside the pool. You may needretainer on the top edge of the wall. Run water in
assistance with this.the pool and as it's running, smooth out any
The seams should line up with the walls'wrinkles you find.
framework. Go around the entire pool to pull theIf you try to install this yourself and find yourself
liner edges over the edge of the pool. A smallin a bind, you should contact your pool contractor
portion of the liner material should be left in theso that they can provide you with assistance.
center.They will be able to help you to install your above
Part of the coping that is covering the liner shouldground pool liner correctly.
be replaced. Make sure they are snug enough so