DIY Above Ground Pool Installation

Swimming Pool Season is coming up. Its time forwalls around the bottom track, you can install the
a lot of us to get our start-up chemicals ordered.upper zones to help with wall stability, making sure
To open up our pools, and see how they fairedyou install the uprights around the sided of the
over the winter season. A lot of warmer climatepool, (if you are installing an oval pool).
swimming pool owners may be starting right now.Your walls are up and secure, then add the sand
Some of us need to wait a little bit longer as it isin the center. Only use fine sifted sand because if
still to cold. If you don't have an Above Groundyou don't, you will feel every rock or stone as
Swimming Pool, and have been thinking aboutyou walk across your pool, or may run the risk
getting one, now is the time. Installing your ownof puncturing your liner. Two inches of sand is
Ground Swimming Pool can be accomplished byrequired on the floor with six inches along where
the DIY, providing you follow some simplethe floor meets the wall. To make it a lot easier,
guidelines. As always follow the manufacturesinstall quarter inch polypropylene foam mat on the
instructions that you get with our Pool Kit.bottom after the sand is in. This is so when it is
After making sure where you want to place yourtime to install your Pool Liner, you will not have
pool, insuring adequate space around the entireany problems with footprints in the sand,
pool, the most important thing to do is to makeunderneath the liner.
sure the ground where the pool is to be placed isNow that you are finished with the sand, it is time
level. Most of us don't know how to use or haveto install the Liner. Drop it in and secure it to the
access to a transom, so you can use an 8ft 2x4walls. May pools still use the overlap liner which is
and a level. Make sure the 2x4 is as straight aseasy to install. As the name implies, the Pool Liner
can be, or it will mess up your measurements.overlaps the top of the wall and is secured with
The bottom structure of the pool has bottomplastic clips. Then over that you place your pool
tracks that are joined together by connectingledge. Another type is a J beak liner, which has
plates. Underneath each plate position and bury abuilt in hooks on the top edge of the liner. These
patio block measuring 12"x12"x 1" thick, makingliner types are characterized by beautiful patterns
sure block is level with the ground, for stability. Doon the top edge. Either type of Above Ground
not bring in dirt to level anything out at this point,Pool Liner is fine and works well.
because it is best to have the foundation of yourThese are just a few guidelines to installing your
pool sit on virgin soil. This type of soil has hadown Aboveground Swimming Pool. Please make
time to pack-down and it is what's needed tosure you read the manufactures instructions very
ensure your pool doesn't shift once it is filled withcarefully that are included in your Above Ground
water.Pool Kit. Once installed, you will be able to enjoy
Once you have the rings and plate in place, youany years of fun swimming with family, friends
can start to construct the walls. As you run theand loved ones.